Load bearing car park and terrace roofs

CDI > Applications > Uncategorized > Load Bearing Flat Roofs

Including a roof that can be used as a place to park a car or use as a terrace can prove to be a challenge, we have a number of systems that are either designed for this or can be used for this application.

Key to the success of a roof such as this is the load-bearing capacity of the system, combined with being able to provide sufficient insulation as well as not having a very deep build-up or being very heavy.

Our systems include the following:

Op-Deck
- Large spans and high loads
- White soffit ceiling finish
- Car-park roofs
- Intensive green roofs and underground buildings
Lewis Deck
- High load-bearing potential on timber or steel joisted structures
- Very thin concrete build-up
- Flat-roof terraces and balconies

Both a balcony and a terrace define spaces that connect the interior spaces with the outdoor areas. However, they do not designate the same space. There are a few major differences between the two and the terms shouldn’t be used interchangeably.

The term “terrace” comes from Latin where it means “earth” indicating the fact that a terrace is built on a raised plan. So basically this space is a raised flat area, usually at the top of a building or residence, but can equally be on lower levels, for example over basement or a lower level of the building

Modern-day terraces can serve a variety of purposes. They can be open gardens for example, an increasingly popular feature in urban areas. Having a beautiful garden in the middle of a busy city is very refreshing and rejuvenating. On a terrace you can also install a Jacuzzi or even a pool and turn the space into a beautiful oasis.

Available Systems

Op-Deck

Including a roof that can be used as a place to park a car or use as a terrace can prove to be a challenge, we have a number of systems that are either designed for this or can be used for this application. Key to the success of a roof such as this is …

Lewis Deck

Lewis Metal Dovetailed Sheeting Deck with acoustic Sylomer resilient strips

Including a roof that can be used as a place to park a car or use as a terrace can prove to be a challenge, we have a number of systems that are either designed for this or can be used for this application. Key to the success of a roof such as this is …

Hody

Including a roof that can be used as a place to park a car or use as a terrace can prove to be a challenge, we have a number of systems that are either designed for this or can be used for this application. Key to the success of a roof such as this is …

Case Studies

Self Build & Renovations

Conversion of a mansion house to high quality apartments

View case study

Conversion to apartments by Octagon Homes

View case study

Triangle House, West Sussex

View case study

High Performance Acoustic Floors

View case study

Green Port Hull

Lewis Plate Underfloor heating metal decking to a timber frame house in Scotland

View case study

New House, Bellwood Park, Perth, Scotland

FastSlab installation to the ground floor of this listed manor house, for a concrete feel over the basement and to include under floor heating

FastSlab ground floor renovation system to replace an improve a timber ground floor and include underfloor heating. maintains the void

View case study

Ingerthorpe Grange, Markington, Nr Ripon

View case study

FastSlab Renovation Project, Hampshire

View All

FAQs22

Ask CDI a Question

Product FAQ's

Q
What are the Lewis Deck sheet sizes?

A
Q: What sheet sizes are held in stock for delivery within a few days after order? A: We stock 2500mm and 1300mm sheets. These are all 630mm wide and 16mm deep. Deliveries are made via the pallet network directly to site. The smaller sheets are aimed at small bathroom renovation projects and can be supplied in small numbers via TNT. 2.5* and 1.3m sheets allow for the 100mm overlap to occur over a joist, with joist centres being either 300mm, 400mm, 600mm, 800mm*, 1200mm and 2400mm*. (*2.5m sheet only) For larger projects we are able to produce bespoke sheet sizes if required, please get in contact to discuss other options for sheet sizes.

General FAQ's

Q
Why don't my Lewis sheets interlock like they do in the video?

A
Q: Why don't my sheets interlock like they do in the video? A: The sheets have two sides (one printed, one plain), the dovetails on either side are different widths, it is then necessary to alternate the sheets print up and then print down.

Q
Is this a question?

A
If it is, this is an answer.

Ask CDI a Question

Latest Events

and Exhibitions

View event

View All

Latest Blog

CDI 2024

Cow Close Barn with Heat Pump and Underfloor Heating

01st January 1970

Paul M contacted us in early 2022 to discuss the use of the Lewis Deck system following a recommendation by his Ground Source Heat Pump system installer. We worked through the drawings and provided a quote, the Lewis Deck and…

View All

2022 Has Begun and Exhibitions Are, Fingers Crossed, Back To Normal.

21st January 2022

Starting on Friday 28th January, now that COVID has magically disappeared, we are heading back on the road and will be exhibiting for a full year for the first time since 2019. Next Friday sees the first exhibition at the…

View All

Lewis Deck Brochure Content

01st January 1970

As part of a joisted floor construction, LEWIS® Dovetailed metaldecking provides a first class solution for ACOUSTICS, FIRE PROTECTION and workswell with UNDERFLOOR HEATING AND COOLING systems.LEWIS® Dovetailed metal decking solutions are used in a range of applications includingrenovations and…

View All