- About CDI
For the 6th year running we will be exhibiting at the Homebuilding and Renovating Show at the NEC in Birmingham. This is to be held between Thursday 23rd March to Sunday 26th March.
Last years show was one of the busiest we’ve ever seen and hopefully this year will be just the same.
Please come down and see us, if you are planning on attending, we will be on stand E187.
At this years show we will be exhibiting our Lewis Deck acoustic floor system, Lacomet FL (lead replacement system), Max4 and our FastSlab GF Renovation system.
Ask CDI a Question
What are the Lewis Deck sheet sizes?A
Q: What sheet sizes are held in stock for delivery within a few days after order? A: We stock 2500mm and 1300mm sheets. These are all 630mm wide and 16mm deep. Deliveries are made via the pallet network directly to site. The smaller sheets are aimed at small bathroom renovation projects and can be supplied in small numbers via TNT. 2.5* and 1.3m sheets allow for the 100mm overlap to occur over a joist, with joist centres being either 300mm, 400mm, 600mm, 800mm*, 1200mm and 2400mm*. (*2.5m sheet only) For larger projects we are able to produce bespoke sheet sizes if required, please get in contact to discuss other options for sheet sizes.Q
Lacomet – How come it has no scrap value?A
Lacomet – How come it has no scrap value? Many of the projects that we get involved in starts with a phone call or email to us from someone researching replacing stolen leadwork. Many of these are old buildings, such as schools or churches, where this isn’t the first time that the lead has been stolen and they call us fed up with having to replace it again full in the knowledge that they will more than likely go through the same problem once more in the near future if they continue to use lead. One of the big benefits that Lacomet FL brings to a project is the fact that it has no scrap value and therefore the chances of it being stolen are massively reduced. Due to the 2 thin aluminium layers, and its five layer total construction, it is of no value to thieves. Lacomet can be recycled but the polyester based coating would need to be de-laminated first and the amount of recovered aluminum is then very low, in fact it would be easier and more profitable to collect empty drinks cans than to mess about stripping Lacomet down. We can also supply stickers that can be placed in strategic locations informing people that what is now on the roof is not lead and that it has no scrap value.
Why don't my Lewis sheets interlock like they do in the video?A
Q: Why don't my sheets interlock like they do in the video? A: The sheets have two sides (one printed, one plain), the dovetails on either side are different widths, it is then necessary to alternate the sheets print up and then print down.Q
Is this a question?A
If it is, this is an answer.
Notes from a New Self Builder
01st November 2018
Here at CDI we spend a lot of time at exhibitions, on the phone, writing emails and going out to site and advising people on how Lewis Deck, along with our other floor systems, should be installed and how to…View All
"How to Choose a Floor Structure" Article
28th June 2018
In the recent Homebuilding & Renovation online magazine Ian Rock discusses the options when it comes to choosing a floor structure for both the ground and upper floors. When it comes to ground floor the usual players are listed. These…View All
Are You Following Our Social Media Pages?
12th June 2018
Are you following our Social Media pages yet? If not you are missing out on more up to date information about what we are getting up to and where you can meet up with us. You can find us on…View All
Chat LiveHi you're speaking to Dave, how can I help.