Delivery - CDI
Delivery

Delivery

What does “Delivery” mean?

Well for us it could mean a couple of things. The obvious one is how doe we get our systems and products to you? This is the simple one to answer, it’s however we can. We utilise a number of different solutions when it comes to actually getting our products out there to you.

For the smallest of items we can put them in the post or if they are slightly bigger we deal with a number of couriers to ensure that we can get the items you need to you at the best possible price. For our larger items, such as our Lewis Deck sheets or our Op-Deck panels, we work with local hauliers again to ensure that we can get our products to you as economically as possible and for when you require them.

For these large products we generally use taught liner vehicles without mechanical offload facilities, however, we also work with hauliers that have HIAB vehicles should you not have your own offloading facilities on site.

curtain sided vehicle

Alternatively “Delivery” could mean how do we help you deliver your project successfully?

Here at CDI-ICM we take great satisfaction in helping our customers achieve their goals and create the buildings that they have been wanting. Whether that is using us to flash over a window using our Lacomet non-lead flashing material, creating an isolated acoustic floor within a new build home that allows them to have an efficient underfloor heating system upstairs, or even help someone build on a tricky site that previously would have been too difficult or expensive to do so, we are here to help people achieve their dreams.

Behind us we have a team of partners from designers and engineers to product specialists and specialist contractors on hand to help us help you to get what you want from your project.

All you have to do is ask and we’ll do everything we can to help. And, should we not have the expertise to help, we’ll try our hardest to find someone who can.

Engineers

FAQs22

Ask CDI a Question

  • Q

    What are the Lewis Deck sheet sizes?

    A

    Q: What sheet sizes are held in stock for delivery within a few days after order? A: We stock 2500mm and 1300mm sheets.  These are all 630mm wide and 16mm deep.  Deliveries are made via the pallet network directly to site.  The smaller sheets are aimed at small bathroom renovation projects and can be supplied in small numbers via TNT. 2.5* and 1.3m sheets allow for the 100mm overlap to occur over a joist, with joist centres being either 300mm, 400mm, 600mm, 800mm*, 1200mm and 2400mm*. (*2.5m sheet only) For larger projects we are able to produce bespoke sheet sizes if required, please get in contact to discuss other options for sheet sizes.

    Q

    Lacomet – How come it has no scrap value?

    A

    Lacomet – How come it has no scrap value? Many of the projects that we get involved in starts with a phone call or email to us from someone researching replacing stolen leadwork. Many of these are old buildings, such as schools or churches, where this isn’t the first time that the lead has been stolen and they call us fed up with having to replace it again full in the knowledge that they will more than likely go through the same problem once more in the near future if they continue to use lead. One of the big benefits that Lacomet FL brings to a project is the fact that it has no scrap value and therefore the chances of it being stolen are massively reduced. Due to the 2 thin aluminium layers, and its five layer total construction, it is of no value to thieves. Lacomet can be recycled but the polyester based coating would need to be de-laminated first and the amount of recovered aluminum is then very low, in fact it would be easier and more profitable to collect empty drinks cans than to mess about stripping Lacomet down. We can also supply stickers that can be placed in strategic locations informing people that what is now on the roof is not lead and that it has no scrap value.

  • Q

    Why don't my Lewis sheets interlock like they do in the video?

    A

    Q: Why don't my sheets interlock like they do in the video? A: The sheets have two sides (one printed, one plain), the dovetails on either side are different widths, it is then necessary to alternate the sheets print up and then print down.

    Q

    Is this a question?

    A

    If it is, this is an answer.

Ask CDI a Question

Latest Blog

CDI 2022

2022 Has Begun and Exhibitions Are, Fingers Crossed, Back To Normal.

21st January 2022

Starting on Friday 28th January, now that COVID has magically disappeared, we are heading back on the road and will be exhibiting for a full year for the first time since 2019. Next Friday sees the first exhibition at the…

View All
Lewis Deck Logo

Lewis Deck Brochure Content

01st January 1970

As part of a joisted floor construction, LEWIS® Dovetailed metaldecking provides a first class solution for ACOUSTICS, FIRE PROTECTION and workswell with UNDERFLOOR HEATING AND COOLING systems.LEWIS® Dovetailed metal decking solutions are used in a range of applications includingrenovations and…

View All

We Have New Lewis Deck Installation Videos

13th October 2020

We keep on being asked about how to lay our Lewis Deck system and the previous installation video wasn’t ideal when it came to showing how simple this was. So, in conjunction with the manufacturer of the deck we’ve had…

View All
View All

Chat Live

Hi you're speaking to Dave, how can I help.

Website by Indigo

Delivery - CDI