Hody to Alexandra Dock

The scheme includes infilling one third of Alexandra Dock with 780,000 m3 of material and reclaiming 7.5 ha of the river to create a new 650m quay wall, which can accommodate three offshore wind installation vessels.

Construction will also involve dredging a new berth pocket, completion of earthworks and surfacing, building internal access roads and service networks, construction of a new Roll-on / Roll-off ramp and demolition of some existing buildings.

Green-Port-Hull-Striding-Forward2

 

Our Hody system was used in the 3 Primary Substations on the site to create the first floor decks of the steel framed buildings within the Alexandra Dock project.

maxresdefault

 

 

FAQs

Ask CDI a Question

  • Q

    What are the Lewis Deck sheet sizes?

    A

    Q: What sheet sizes are held in stock for delivery within a few days after order?A: We stock 2500mm and 1300mm sheets.  These are all 630mm wide and 16mm deep.  Deliveries are made via the pallet network directly to site.  The smaller sheets are aimed at small bathroom renovation projects and can be supplied in small numbers via TNT.2.5* and 1.3m sheets allow for the 100mm overlap to occur over a joist, with joist centres being either 300mm, 400mm, 600mm, 800mm*, 1200mm and 2400mm*. (*2.5m sheet only)For larger projects we are able to produce bespoke sheet sizes if required, please get in contact to discuss other options for sheet sizes.

    Q

    Lacomet – How come it has no scrap value?

    A

    Lacomet – How come it has no scrap value?Many of the projects that we get involved in starts with a phone call or email to us from someone researching replacing stolen leadwork. Many of these are old buildings, such as schools or churches, where this isn’t the first time that the lead has been stolen and they call us fed up with having to replace it again full in the knowledge that they will more than likely go through the same problem once more in the near future if they continue to use lead.One of the big benefits that Lacomet FL brings to a project is the fact that it has no scrap value and therefore the chances of it being stolen are massively reduced.Due to the 2 thin aluminium layers, and its five layer total construction, it is of no value to thieves. Lacomet can be recycled but the polyester based coating would need to be de-laminated first and the amount of recovered aluminum is then very low, in fact it would be easier and more profitable to collect empty drinks cans than to mess about stripping Lacomet down. We can also supply stickers that can be placed in strategic locations informing people that what is now on the roof is not lead and that it has no scrap value.

  • Q

    Why don't my Lewis sheets interlock like they do in the video?

    A

    Q: Why don't my sheets interlock like they do in the video?A: The sheets have two sides (one printed, one plain), the dovetails on either side are different widths, it is then necessary to alternate the sheets print up and then print down.

    Q

    Is this a question?

    A

    If it is, this is an answer.

Ask CDI a Question

Latest Blog

CDI 2018

An Introduction to CDI-ICM

09th May 2018

During the recent Homebuilding and Renovation Show at the NEC in Birmingham Chris was able to get in front of a camera and give an introduction into CDI Innovative Construction Materials and explaining what we are all about and how…

View All

More Exhibitions Coming Up!!

09th May 2018

With Ecobuild and the Homebuilding and Renovation Show all done and dusted along with the first show at the National Self Build & Renovation Centre we’ve had a few weeks to reflect on good they were for us. The number…

View All

Creaky wooden floors

19th October 2017

We often talk to visitors at exhibitions about the issue of noisy floors, usually the issue of squeaky wooden floors, whilst our systems are often used to provide the fire and acoustic separation in an apartment situation, it is creaks…

View All
View All

Chat Live

Hi you're speaking to Dave, how can I help.

Website by Indigo