- About CDI
Our largest event of the year is always the Homebuilding & Renovation Show taking place at the NEC in Birmingham.
This years event NOW RUNS FROM 9TH TO THE 12TH OF JULY 2020. This year we will have our Lewis Deck on show in a number of different situations to show you exactly what you can achieve by using the system.
We will show it in a new build scenario, with posi-joists, and a high performance resilient strip, designed to increase the acoustic performance of the floor as well as increase the efficiency of the underfloor heating system.
We will also show you how it can be used in a renovation/ conversion project where weight or heights may be an issue.
We’ll also have a wetroom on show with Lewis Deck and maybe a couple of other systems and ways of creating a floor that may be pf interest to you in you project.
For 2 free tickets to the event please click the link below.
Ask CDI a Question
What are the Lewis Deck sheet sizes?A
Q: What sheet sizes are held in stock for delivery within a few days after order? A: We stock 2500mm and 1300mm sheets. These are all 630mm wide and 16mm deep. Deliveries are made via the pallet network directly to site. The smaller sheets are aimed at small bathroom renovation projects and can be supplied in small numbers via TNT. 2.5* and 1.3m sheets allow for the 100mm overlap to occur over a joist, with joist centres being either 300mm, 400mm, 600mm, 800mm*, 1200mm and 2400mm*. (*2.5m sheet only) For larger projects we are able to produce bespoke sheet sizes if required, please get in contact to discuss other options for sheet sizes.Q
Lacomet – How come it has no scrap value?A
Lacomet – How come it has no scrap value? Many of the projects that we get involved in starts with a phone call or email to us from someone researching replacing stolen leadwork. Many of these are old buildings, such as schools or churches, where this isn’t the first time that the lead has been stolen and they call us fed up with having to replace it again full in the knowledge that they will more than likely go through the same problem once more in the near future if they continue to use lead. One of the big benefits that Lacomet FL brings to a project is the fact that it has no scrap value and therefore the chances of it being stolen are massively reduced. Due to the 2 thin aluminium layers, and its five layer total construction, it is of no value to thieves. Lacomet can be recycled but the polyester based coating would need to be de-laminated first and the amount of recovered aluminum is then very low, in fact it would be easier and more profitable to collect empty drinks cans than to mess about stripping Lacomet down. We can also supply stickers that can be placed in strategic locations informing people that what is now on the roof is not lead and that it has no scrap value.
Why don't my Lewis sheets interlock like they do in the video?A
Q: Why don't my sheets interlock like they do in the video? A: The sheets have two sides (one printed, one plain), the dovetails on either side are different widths, it is then necessary to alternate the sheets print up and then print down.Q
Is this a question?A
If it is, this is an answer.
Hi Everyone, Just A Quick Note on The Lockdown
15th April 2020
Hi Everyone! Just a quick note to let everyone know we are still doing what we can through these tough, and weird, times. We are working from the safety of our homes so we are able to keep giving the…View All
Happy New Year!!
13th January 2020
Happy New Year everyone, we hope you all had a fantastic Christmas break and are ready to get back to it. They say time flies, we’re already into our 2nd week of January and we have been pretty busy already…View All
Notes from a New Self Builder
01st November 2018
Here at CDI we spend a lot of time at exhibitions, on the phone, writing emails and going out to site and advising people on how Lewis Deck, along with our other floor systems, should be installed and how to…View All
Chat LiveHi you're speaking to Dave, how can I help.