2022 Has Begun and Exhibitions Are, Fingers Crossed, Back To Normal.
2022 Has Begun and Exhibitions Are, Fingers Crossed, Back To Normal.

Starting on Friday 28th January, now that COVID has magically disappeared, we are heading back on the road and will be exhibiting for a full year for the first time since 2019.

Next Friday sees the first exhibition at the National Self Build Build & Renovation Centre in Swindon where we have a permanent stand (E171). Going on until late Sunday afternoon this three day event is our traditional curtain raiser, a bit like the Community Shield, to the exhibition year.

Following this we head to London, at the beginning of March, for Futurebuild. This 3 day event, from the 1st to the 3rd March, sees us setting up at ExCel, at the Docklands, where this year we’ll be at an all new stand location as the whole exhibition has had a shake up. As such our new stand location, E54, could not be more central in the hall, right next to the “Headline Partners” stand, which this year is the Construction Innovation Hub, by the RIBA Bookshop.

At the end of March, between Friday 24th and Sunday 27th, we have our biggest exhibition of the year which is the Homebuidling & Renovation Show at the NEC in Birmingham. We will be on our normal stand here, E187.

Our second NSBRC show is then on between 13th and 14th May followed then by the Built It Live, Bicester Show between the 11th and 12th June.

We then finish the exhibition year, at the moment, on the weekend of the 30th September to 2nd October with the Autumn NSBRC Show in Swindon.

There may be more events added to this list over the coming months but these are the initial ones that we’ve booked into.

We hope to see you at one of these shows.

For more information on these exhibitions please visit the Exhibitions section of our website at Events & Exhibitions – CDI (cdi-icm.co.uk)

List of 2022 Exhibitions That We’ll Be Attending. 

28-30 January: NSBRC, Swindon Winter Show.

1-3 March: Futurebuild, ExCel London.

24-27 March: Homebuilding & Renovation Show, NEC Birmingham.

13-14 May: NSBRC, Swindon Spring Show.

11-12 June: BuildIt Live, Bicester.

23-24 September: NSBRC, Swindon Autumn Show.

30 September – 2 October: Homebuilding & Renovation Show, ExCel London.

More may be added in due course.

FAQs22

Ask CDI a Question

  • Q

    What are the Lewis Deck sheet sizes?

    A

    Q: What sheet sizes are held in stock for delivery within a few days after order? A: We stock 2500mm and 1300mm sheets.  These are all 630mm wide and 16mm deep.  Deliveries are made via the pallet network directly to site.  The smaller sheets are aimed at small bathroom renovation projects and can be supplied in small numbers via TNT. 2.5* and 1.3m sheets allow for the 100mm overlap to occur over a joist, with joist centres being either 300mm, 400mm, 600mm, 800mm*, 1200mm and 2400mm*. (*2.5m sheet only) For larger projects we are able to produce bespoke sheet sizes if required, please get in contact to discuss other options for sheet sizes.

    Q

    Lacomet – How come it has no scrap value?

    A

    Lacomet – How come it has no scrap value? Many of the projects that we get involved in starts with a phone call or email to us from someone researching replacing stolen leadwork. Many of these are old buildings, such as schools or churches, where this isn’t the first time that the lead has been stolen and they call us fed up with having to replace it again full in the knowledge that they will more than likely go through the same problem once more in the near future if they continue to use lead. One of the big benefits that Lacomet FL brings to a project is the fact that it has no scrap value and therefore the chances of it being stolen are massively reduced. Due to the 2 thin aluminium layers, and its five layer total construction, it is of no value to thieves. Lacomet can be recycled but the polyester based coating would need to be de-laminated first and the amount of recovered aluminum is then very low, in fact it would be easier and more profitable to collect empty drinks cans than to mess about stripping Lacomet down. We can also supply stickers that can be placed in strategic locations informing people that what is now on the roof is not lead and that it has no scrap value.

  • Q

    Why don't my Lewis sheets interlock like they do in the video?

    A

    Q: Why don't my sheets interlock like they do in the video? A: The sheets have two sides (one printed, one plain), the dovetails on either side are different widths, it is then necessary to alternate the sheets print up and then print down.

    Q

    Is this a question?

    A

    If it is, this is an answer.

Ask CDI a Question

Latest Blog

CDI 2022

2022 Has Begun and Exhibitions Are, Fingers Crossed, Back To Normal.

21st January 2022

Starting on Friday 28th January, now that COVID has magically disappeared, we are heading back on the road and will be exhibiting for a full year for the first time since 2019. Next Friday sees the first exhibition at the…

View All
Lewis Deck Logo

Lewis Deck Brochure Content

01st January 1970

As part of a joisted floor construction, LEWIS® Dovetailed metaldecking provides a first class solution for ACOUSTICS, FIRE PROTECTION and workswell with UNDERFLOOR HEATING AND COOLING systems.LEWIS® Dovetailed metal decking solutions are used in a range of applications includingrenovations and…

View All

We Have New Lewis Deck Installation Videos

13th October 2020

We keep on being asked about how to lay our Lewis Deck system and the previous installation video wasn’t ideal when it came to showing how simple this was. So, in conjunction with the manufacturer of the deck we’ve had…

View All
View All

Chat Live

Hi you're speaking to Dave, how can I help.

Website by Indigo

2022 Has Begun and Exhibitions Are, Fingers Crossed, Back To Normal.